| 1609 | TIE (Blue; n4; Plastic; reusable) - Use for coiling the Cable Assembly among other things | EACH | $1.27 | |
| 1629 | DOME PLUG (Black; Plastic) - Use to plug large holes on the Body Assembly of the Aquabot Turbo T2 / T4 | EACH | $0.83 | |
| 2400 | NAIL PLUG (White; Plastic) - Use to plug small holes on the Body Assembly | EACH | $1.27 | |
| 3101 | FLOAT (Place under Drive Motor) | EACH | $1.67 | |
| 3607 | WASHER (Use on All Pulley Assemblies; Use on Movable Axle of Jet / Rover cleaners; Rounded edges facing inward) | EACH | $5.83 | |
| 7207 | FUSE (2.5 Amp; MINI; 250 Volt; Slow- Blow) - All Residential cleaners with Dial Timer Power Supply | EACH | $3.07 | |
| 800070 | NOVUS 2 Plastic Polish 24 oz. Bottle - Polish for the plastic components | EACH | $80.56 | |
| A800135 | <p>
MAIN DRAIN BUMPER - Can be used on most Pools' Main Drain; where a cleaner may get stuck</p>
<p>
<strong><span style="color: rgb(255, 0, 0);">This item Is replaced with Smart Ring!!</span></strong> | EACH | $79.20 | |
| SP11085 | WHEEL TUBE CLUTCH - Aquabot Turbo T2 (version 2004-2005) | SET OF 2 | $10.60 | |
| SP5173 | WEIGHTS (Black) - Put in Bottom Lid if cleaner's wall-climbing is too high; or to help JetMax / Jr sink to floor | PAIR | $6.97 | |
| 1 | A10000BK | <p>
HANDLE ASSY. (Black & White; Bracket included) - Aquabot Turbo T2 | EACH | $103.88 | |
| 2 | S1100BK | HANDLE BRACKET (Black; Stationary) - Aquabot Turbo T2 (version 2004-2005) | EACH | $34.85 | |
| 3 | 2599 | BUSHING (Black; Plastic; Small; for around pin between Handle and Bracket) - Turbo T2 (2004-2005) | EACH | $0.83 | |
| 4 | 11003 | CLEVIS PIN (Round Head; hole in end) - Use to link the Handle Assembly arm to the Handle Bracket | EACH | $2.86 | |
| 6 | 11004 | WASHER (St.Steel) - Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket | EACH | $0.83 | |
| 7 | 11005 | COTTER RING (Aluminum; 3/16") - Use at end of the Clevis Pin to hold the Handle Bracket | EACH | $0.83 | |
| 8 | 1105 | SCREW (10-32; 7/8; Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly | EACH | $1.27 | |
| 9 | 2701 | SCREW (8; 11/16; Phil Pan Head) - Use to fasten Pump Motor | EACH | $1.27 | |
| 12 | 2100 | P-CLIP (1/4; Plastic) - Use to fasten the non-foam-insulated part of a 2-wire cable to the Body | EACH | $1.27 | |
| 12 | 2102 | P-CLIP (7/16; Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Handle Assy. | EACH | $1.27 | |
| 12 | 8316 | P-CLIP (9/16; Plastic) - Use to fasten the Heat Shrink part of the 2-wire cable to the Handle Assy. | EACH | $1.27 | |
| 13 | 2700 | SCREWS (8; 11/16; Phil Pan-Flat Head) - Use to fasten P-Clips; and Drive Motors | EACH | $1.27 | |
| 14 | 2260 | SCREWS (6; 7/16; Phil Pan-Flat Head) - Use for P-Clips; Outlet Top; and H-Float | EACH | $1.27 | |
| 15 | 1601 | PLUG (3-Pin; Female; 2-Wire) - Aquabot / Storm / Turbo / Tempo / T2; Aquamax; Aquamax Jr; All Jet / Rover | EACH | $14.63 | |
| 16 | S7930 | EZ-SWIVEL (For 2-wire Cable) - Can be used on any 2-wire Cable Assembly | ASSEMBLY | $46.62 | |
| 17 | 1661BK | CABLE ASSY. (2-Wire; 60 Foot; Floating; Black) - Aquabot Turbo T2 (version 2004-2005) | EACH | $282.33 | |
| 25 | 5062BK | OUTLET TOP (Black; Dome) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | EACH | $12.70 | |
| 26 | A5097 | BODY ASSY. (Mint Green; with Lock Tabs; Pin; Outlet Ring; Inserts) - Aquabot Turbo T2 (version 2004-2005) | EACH | $150.42 | |
| 27 | 1129 | SCREWS (6/32" Pan Head Phillips) - Use to fasten the Outlet Top on the Aquabot Turbo T2 / T4 | EACH | $1.27 | |
| 29 | SP2300BK | ANTI-ROLL BRACKETS (Plastic; Black) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | SET OF 4 | $11.77 | |
| 30 | SP3402 | LOCK-NUTS (Hex; Nylon insert; for various uses: Sideplate Bolts; Anti-Roll Brackets; Pole Handle Assy.) | SET OF 8 | $6.72 | |
| 31 | 2261 | SCREW (M-5; Phil Bev Head) - Use to fasten the Anti-Roll Brackets to the Body Assembly | EACH | $1.27 | |
| 36 | SP9204BK | LOCK-TABS (Black; Plastic) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | SET OF 2 | $3.60 | |
| 37 | S3394 | BRACKET / WHEEL ASSEMBLY (Black; Stationary Wheel assembly) - Turbo T2 (version 2004-2005) | EACH | $4.22 | |
| 38 | 2303 | SCREWS (18-8; 8/32 x 1/2; Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly | EACH | $1.27 | |
| 39 | 7133 | LOCK-NUT (Nylon Insert; Hex) - Use to fasten the Screws of the Lock-Tabs | EACH | $0.83 | |
| 40 | 1628 | GROMMET (Rubber) - Use around Cable Assembly on Body - Aquabot T2 / T4; All ThunderJet cleaners | EACH | $2.44 | |
| 42 | 2661 | BUSHING (Black; Plastic; Use around Poly-Tubing on Body Assembly; and end of Axels) - Aquabot T2 / T4 | EACH | $2.44 | |
| 45 | 3400BK | SIDEPLATE (Black; no holes) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | EACH | $27.88 | |
| 47 | 3397 | JET BRACKET (Black; Plastic; Fits in Sideplate) - Aquabot Turbo T2 / Turbo T4 (version 2004-2005) | EACH | $11.21 | |
| 51 | 2600BK | BUSHING (Black; Plastic) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | EACH | $2.76 | |
| 52 | 2610BK | BUSHING (Black; Plastic; Use for Pin on Body Assembly) - Aquabot Turbo T2; Aquabot Turbo T4 | EACH | $4.66 | |
| 55 | 3700 | LARGE ROLLER (White; Plastic) - Supports the Drive Track; installs on Body Assembly Pin Support | EACH | $3.60 | |
| 56 | 3506 | STEPPED SLEEVE ROLLER (White; Thicker end supports Drive Belts; Install on upper Sideplate legs) | EACH | $2.76 | |
| 57 | SP3302 | DRIVE BELTS (Tan) | PAIR | $17.38 | |
| 58 | A3605 | PULLEY ASSEMBLY (Medium; ~ 2.75 inches) - Use for cleaners with Black Drive Motors | EACH | $33.81 | |
| 60 | A6005 | PUMP MOTOR (Aquabot Turbo T2; T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax Jr; PHV 100 / 200) | EACH | $213.79 | |
| 61 | 4402 | PROPELLER - Aquabot Turbo T2/T4; AquaJet; JetMax/Junior; Pool Rover/Plus/Junior; ThunderJet cleaeners | EACH | $12.25 | |
| 63 | 6027 | IMPELLER (Red) - Aquabot T2 / T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax / Jr; PHV 100 / 200 | EACH | $12.25 | |
| 64 | 6028 | IMPELLER HOUSING (Red) - Aquabot T2 / T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax; PHV 100 / 200 | EACH | $12.25 | |
| 65 | 300096 | TUBING (Clear PVC; 5/16ID x 1/2OD) - Use to divert water from the Impeller to the Nozzle Bracket | PER FOOT | $1.10 | |
| 80 | A8541 | DRIVE MOTOR (Black; bare wire leads) - Aquabot Turbo T2 (version 2004-2005 and 2006) | EACH | $309.33 | |
| 83 | 4613 | SPIRAL PIN (3/4"; solid Stainless Steel) - Used in the end of the Drive Motor shaft; use Lock-Tite | EACH | $1.27 | |
| 86 | SP5474 | SHRINKABLE BUTT CONNECTORS (Light Blue; crimp closed and heat shrink to seal) | PAIR | $2.54 | |
| 87 | SP1617 | SHRINK TUBE (5/16; Blue) - For sealing 2-wire connections; use under Heat Shrink 1619 | 4 FEET | $46.64 | |
| 87 | SP1619 | SHRINK TUBE (1/2; Black) - For sealing 2-wire connections; use over Heat Shrink 1617 | 4 FEET | $46.64 | |
| 88 | 1625 | SHRINK TUBE (3/4; Black) - For sealing all medium sized connections at the Junction Box | 4 FEET | $46.64 | |
| 90 | A38007 | WHEEL TUBE ASSY (Aquabot Turbo T2) (version 2004-2005) | EACH | $104.92 | |
| 91 | 11058 | RETAINING RING (E-Clip; New Style) - Aquabot Turbo; AB Plus RC; Aquabot T4; AB Ultra; All AMAX / UMAX | EACH | $3.67 | |
| 91 | 11059 | RETAINING RING (C-Clip; requires Snap-Ring Pliers) - Aquabot T2; also for inner Sideplates of Ultramax | EACH | $3.67 | |
| 92 | 3603 | WASHER (Nylon; Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly | EACH | $1.27 | |
| 97 | SP3003BK4 | RUBBER BRUSHES (Black Molded Rubber; cut in half; Short) - Aquabot Turbo T2 (version 2004-2005) | SET OF 4 | $77.89 | |
| 97 | SP3018BK | SUPER EZ-BRUSHES (Black; cut in half; Short) - Aquabot Turbo T2 (version 2004-2005) | SET OF 4 | $77.89 | |
| 99 | 3200 | <p>
DRIVE TRACK (Black) | EACH | $22.24 | |
| 99 | 3201 | <p>
DRIVE TRACK (Blue) | EACH | $22.20 | |
| 99 | 3203 | DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $22.24 | |
| 100 | SP2675 | MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 | $4.88 | |
| 101 | 8100 |
<p> FILTER BAG (Fine) - Aquabot / Turbo / Plus RC / T2 / T4 (2006); Aquamax Jr; PHV 100/300; small Jet / Rover; UMAX ** | EACH | $48.97 | |
| 101 | 8100S | FILTER BAG (Fine) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | EACH | $46.75 | |
| 101 | 8200 | <p>
FILTER BAG (Mesh) - Aquabot / Turbo / Plus RC; Aquamax Jr; PHV 100/300; small Jet & Rover; UMAX ** | EACH | $49.00 | |
| 103 | A5083 | FILTER SCREEN (Blue; Rounded cage) - Aquabot Turbo T2; Aquabot Turbo T4 (version 2004-2005) | EACH | $27.88 | |
| 105 | A9200XMG | BOTTOM LID ASSY. (Mint Green; W-shaped Wire Frame) - Aquabot Turbo T2 (version 2004-2005) | EACH | $92.11 | |
| 106 | 9305BL | INTAKE VALVE FLAP (Blue Plastic) - Fits into Intake of All small n 9200 Bottom Lids | EACH | $4.60 | |
| 108 | S3103 | H-FLOAT (Foam; Plastic; with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough | ASSEMBLY | $11.64 | |
| 109 | SP3104 | SIDE POCKET FLOATS (White; Foam Blocks) - Put in Bottom Lid if wall-climbing is not high enough | PAIR | $3.71 | |
| 110 | 7098C |
POWER SUPPLY (3-Prong; Male Socket; 7hr External Dial Timer) - Aquabot Turbo T2 (version 2004-2005) | EACH | $224.00 | |
| 111 | 7108 | SOCKET ASSY. (3-Pin; Male; 2-Wire) - Aquabot / Turbo / T2; All Jet and Rover cleaners; Aquamax / Jr | EACH | $10.49 | |
| 112 | 7206 | FUSE HOLDER (MINI; Phillips Head style) - Use for All Power Supplies with Dial Timers | EACH | $8.14 | |
| 114 | 7105 | LIGHTED SWITCH (Thin; 1¼ x ½; Red with Light; 3-Wire) - Use for Power Supply | EACH | $8.16 | |
| 114 | 7208 | NON-LIGHTED SWITCH (Thin; 1¼ x ½; Red; 3-Wire) - Use for Power Supply with Dial or Digital Timer | EACH | $8.16 | |
| 117 | 7041A | HANDLE (Plastic; with Hardware) - Use on All Power Supplies except Ultramax Jr; Ultramax; and PHV 300 | ASSEMBLY | $6.23 | |
| 118 | 7102 | CORD FOR POWER SUPPLY (3-Wire; Green; Black; and White) - Use on All Power Supplies | EACH | $11.66 | |
| 119 | 7074 | TIMER 7 HOUR (Front Dial; Adjustable) - Aquabot Turbo / Solo / RC; T2; T4 (version 2004-2005) | EACH | $52.47 | |