| 1609 | TIE (Blue; n4; Plastic; reusable) - Use for coiling the Cable Assembly among other things | EACH | $1.27 | |
| 3101 | FLOAT (Place under Drive Motor) | EACH | $1.67 | |
| 3397WT | NOZZLE BRACKET (White; Supports Drive Track; holds Nozzle in place) | EACH | $5.83 | |
| 3398WT | NOZZLE (White; Snaps into Nozzle Bracket; connects to Poly Tubing for power washing under cleaner) | EACH | $5.83 | |
| 3607 | WASHER (Use on All Pulley Assemblies; Use on Movable Axle of Jet / Rover cleaners; Rounded edges facing inward) | EACH | $5.83 | |
| 7211 | FUSE (3 Amp; MINI; 250 Volt; Slow-Blow) - New Aquabot Plus RC and Aquabot Ultra; JetMax / JetMax Jr | EACH | $3.07 | |
| 800070 | NOVUS 2 Plastic Polish 24 oz. Bottle - Polish for the plastic components | EACH | $80.56 | |
| A220204FCC | RECEIVER (Radio; 4-Way) - Aquabot Turbo T4 (version 2004-2005); and Aquabot Turbo T4 (version 2006) - - - - - - - - FOR NEW Units only - Responds to A220114C Transmitter - Older units will need order KIT | EACH | $233.14 | |
| A220204KIT | <p>
RECEIVER & TRANSMITTER KIT - Aquabot Turbo T4 (version 2006) - - - - - - - - - KIT includes matched 220114C Radio RC Transmitter (Grey / Yellow face) and A220204FCC Receiver | SET OF 2 | $322.45 | |
| A800135 | <p>
MAIN DRAIN BUMPER - Can be used on most Pools' Main Drain; where a cleaner may get stuck</p>
<p>
<strong><span style="color: rgb(255, 0, 0);">This item Is replaced with Smart Ring!!</span></strong> | EACH | $79.20 | |
| SP11087 | CLUTCH SPACER (2 pieces per Wheeltube) - Aquabot Turbo T2 / T4 (version 2006) | EACH | $5.30 | |
| 1 | A10000WT | HANDLE ASSY. (Bright White; Bracket included) - Aquabot Turbo T; Aquabot Turbo T4 (version 2006) | EACH | $103.88 | |
| 2 | S1100WT | HANDLE BRACKET (Bright White) - Aquabot Turbo T; T4 (version 2006) | EACH | $34.85 | |
| 8 | 1105 | SCREW (10-32; 7/8; Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly | EACH | $1.27 | |
| 9 | 2701 | SCREW (8; 11/16; Phil Pan Head) - Use to fasten Pump Motor | EACH | $1.27 | |
| 12 | 2109 | P-CLIP (Blue; Coated Steel) - Use to fasten the Cable to the Handle of the Turbo T; T2; T4 (version 2006) | EACH | $2.44 | |
| 13 | 2700 | SCREWS (8; 11/16; Phil Pan-Flat Head) - Use to fasten P-Clips; and Drive Motors | EACH | $1.27 | |
| 14 | 2260 | SCREWS (6; 7/16; Phil Pan-Flat Head) - Use for P-Clips; Outlet Top; and H-Float | EACH | $1.27 | |
| 15 | 1640E | PLUG (7-Pin; Male) - Aquabot Plus RC; Aquabot Ultra; Aquabot Turbo T4 (version 2006) | EACH | $45.79 | |
| 16 | S7935 | EZ-SWIVEL (For 4;5;7;or 9-wire Cable) - Can be used on any Cable Assembly with 4 or more wires | ASSEMBLY | $46.62 | |
| 17 | A16675 | CABLE ASSY. (5-Wire; 75 Foot; Floating) - Aquabot Turbo T4 (version 2006) | EACH | $456.53 | |
| 25 | 2230WT | OUTLET TOP (Bright White; Top dome only; does not include bottom Ring) | EACH | $21.18 | |
| 25 | 2250WT | OUTLET RING (Bright White; Ring only; does not include Top dome) | EACH | $9.12 | |
| 26 | A2005BL2 | BODY ASSY. (Blue; with Lock Tabs; Outlet Ring; Inserts) - Aquabot Turbo T4 (version 2006) | EACH | $138.65 | |
| 30 | SP3402 | LOCK-NUTS (Hex; Nylon insert; for various uses: Sideplate Bolts; Anti-Roll Brackets; Pole Handle Assy.) | SET OF 8 | $6.72 | |
| 36 | SP9204W | LOCK-TABS (White; Plastic) - Aquabot Turbo T; T2; T4 (version 2006) | SET OF 2 | $3.60 | |
| 38 | 2303 | SCREWS (18-8; 8/32 x 1/2; Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly | EACH | $1.27 | |
| 39 | 7133 | LOCK-NUT (Nylon Insert; Hex) - Use to fasten the Screws of the Lock-Tabs | EACH | $0.83 | |
| 40 | 1628 | GROMMET (Rubber) - Use around Cable Assembly on Body - Aquabot T2 / T4; All ThunderJet cleaners | EACH | $2.44 | |
| 42 | 2661 | BUSHING (Black; Plastic; Use around Poly-Tubing on Body Assembly; and end of Axels) - Aquabot T2 / T4 | EACH | $2.44 | |
| 45 | S3400WT | SIDEPLATE (Bright White; 4 holes for Bolts) - Aquabot Turbo T4 (version 2006) | EACH | $30.32 | |
| 49 | SP3401 | SCREW (Bolts; Long; For Sideplate) - Aquabot Plus RC / T4 / Ultra; All Aquamax & Ultramax units | SET OF 8 | $9.54 | |
| 51 | 2600BK | BUSHING (Black; Plastic) - Aquabot Turbo T2; T4 (version 2006) | EACH | $2.76 | |
| 55 | 3700 | LARGE ROLLER (White; Plastic) - Supports the Drive Track; installs on Body Assembly Pin Support | EACH | $3.60 | |
| 56 | 3506 | STEPPED SLEEVE ROLLER (White; Thicker end supports Drive Belts; Install on upper Sideplate legs) | EACH | $2.76 | |
| 57 | SP3302 | DRIVE BELTS (Tan) | PAIR | $17.38 | |
| 58 | A3605 | PULLEY ASSEMBLY (Medium; ~ 2.75 inches) - Use for cleaners with Black Drive Motors | EACH | $33.81 | |
| 60 | A6005 | PUMP MOTOR (Aquabot Turbo T2; T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax Jr; PHV 100 / 200) | EACH | $213.79 | |
| 61 | 4402 | PROPELLER - Aquabot Turbo T2/T4; AquaJet; JetMax/Junior; Pool Rover/Plus/Junior; ThunderJet cleaeners | EACH | $12.25 | |
| 63 | 6027 | IMPELLER (Red) - Aquabot T2 / T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax / Jr; PHV 100 / 200 | EACH | $12.25 | |
| 64 | 6028 | IMPELLER HOUSING (Red) - Aquabot T2 / T4; Pool Rover Plus; ThunderJet IG; AquaJet; JetMax; PHV 100 / 200 | EACH | $12.25 | |
| 65 | 300096 | TUBING (Clear PVC; 5/16ID x 1/2OD) - Use to divert water from the Impeller to the Nozzle Bracket | PER FOOT | $1.10 | |
| 80 | A8546 | DRIVE MOTOR (Blue; Master Motor; bare wire leads and connection for Slave Motor) - T4 (version 2006) | EACH | $332.35 | |
| 80 | A8547 | DRIVE MOTOR (Green; Slave Motor; bare wire leads and connection for Master Motor) - T4 (version 2006) | EACH | $297.85 | |
| 86 | SP5474 | SHRINKABLE BUTT CONNECTORS (Light Blue; crimp closed and heat shrink to seal) | PAIR | $2.54 | |
| 87 | SP1617 | SHRINK TUBE (5/16; Blue) - For sealing 2-wire connections; use under Heat Shrink 1619 | 4 FEET | $46.64 | |
| 87 | SP1619 | SHRINK TUBE (1/2; Black) - For sealing 2-wire connections; use over Heat Shrink 1617 | 4 FEET | $46.64 | |
| 88 | 1625 | SHRINK TUBE (3/4; Black) - For sealing all medium sized connections at the Junction Box | 4 FEET | $46.64 | |
| 89 | SP1614 | SHRINK TUBE (1-1/2; Black) - For sealing wide connections at the Junction Box and Cable Assembly | 4 FEET | $46.64 | |
| 89 | SP1614S | SHRINK TUBE (1-1/2; 2.5; Black) - Service kit for sealing large Cable connections | EACH | $2.44 | |
| 90 | A38010 | WHEEL TUBE ASSY. (NEW; Aquabot Plus RC; Aquabot Turbo T4 version 2006) | EACH | $104.92 | |
| 91 | 11059 | RETAINING RING (C-Clip; requires Snap-Ring Pliers) - Aquabot T2; also for inner Sideplates of Ultramax | EACH | $3.67 | |
| 92 | 3603 | WASHER (Nylon; Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly | EACH | $1.27 | |
| 97 | SP3018BL | SUPER EZ-BRUSHES (Blue; cut in half; Short) - Aquabot Turbo T2; T4 (version 2006) | SET OF 4 | $77.89 | |
| 99 | 3203 | DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $22.24 | |
| 101 | 8100 |
<p> FILTER BAG (Fine) - Aquabot / Turbo / Plus RC / T2 / T4 (2006); Aquamax Jr; PHV 100/300; small Jet / Rover; UMAX ** | EACH | $48.97 | |
| 101 | 8200 | <p>
FILTER BAG (Mesh) - Aquabot / Turbo / Plus RC; Aquamax Jr; PHV 100/300; small Jet & Rover; UMAX ** | EACH | $49.00 | |
| 103 | A5080 | FILTER SCREEN (Blue; Rounded cage) - Aquabot Turbo T; T2; T4 (version 2006) | EACH | $27.88 | |
| 103 | SP5310 | FILTER SCREEN (NEW; Blue; Folding Cage with Attachment Strings) - Aquabot Turbo T; T2; T4 (ver 2006) | EACH | $27.88 | |
| 105 | A9200XWB | BOTTOM LID ASSY. (Blue; W-shaped Wire Frame) - Turbo T / T2 / T4 (2006); Pool Rover Jr; AquaJet; PHV 100/300 | EACH | $92.11 | |
| 106 | 9305BL | INTAKE VALVE FLAP (Blue Plastic) - Fits into Intake of All small n 9200 Bottom Lids | EACH | $4.60 | |
| 108 | S3103 | H-FLOAT (Foam; Plastic; with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough | ASSEMBLY | $11.64 | |
| 110 | A7181C |
POWER SUPPLY (7-Pin; 7hr External Digital Timer) - Aquabot Turbo T4 (version 2006) | EACH | $426.00 | |
| 111 | 7149E | SOCKET ASSY. (7-Pin; Female; 7-Wire) - Aquabot Plus RC; Aquabot Ultra | EACH | $34.05 | |
| 112 | 7206 | FUSE HOLDER (MINI; Phillips Head style) - Use for All Power Supplies with Dial Timers | EACH | $8.14 | |
| 114 | 7105 | LIGHTED SWITCH (Thin; 1¼ x ½; Red with Light; 3-Wire) - Use for Power Supply | EACH | $8.16 | |
| 114 | 7208 | NON-LIGHTED SWITCH (Thin; 1¼ x ½; Red; 3-Wire) - Use for Power Supply with Dial or Digital Timer | EACH | $8.16 | |
| 115 | 7023 | ANTENNA (4; with Hardware) - Aquabot T4; Aquabot Plus RC; Aquabot Ultra; UMAX Jr; Ultramax; Gemini | EACH | $11.66 | |
| 116 | 220114C | TRANSMITTER (Radio RC; Grey & Yellow/ Blue???/ Red LED light) - Aquabot Turbo T4; Ultramax units -- -- -- FOR NEW Units - Ultramax uses A220203FCC Receiver /// Turbo T4 uses A220204FCC Receiver | EACH | $89.32 | |
| 117 | 7041A | HANDLE (Plastic; with Hardware) - Use on All Power Supplies except Ultramax Jr; Ultramax; and PHV 300 | ASSEMBLY | $6.23 | |
| 118 | 7102 | CORD FOR POWER SUPPLY (3-Wire; Green; Black; and White) - Use on All Power Supplies | EACH | $11.66 | |
| 119 | 7074D | DIGITAL TIMER (NEW; Front Digital display; 1-7 hours Adjustable) - Aquabot Turbo / T; T2; T4 (ver 2006) | EACH | $52.47 | |
Information
Specials
Categories
Shopping Cart
Latest
