Aquajet Automatic Swimming Pool Cleaner Parts
AQUAJET |
||||||
| Item | Part | ITEM NAME ( Description ) - Cleaner Model(s) it belongs to | Units | Price | ||
| 12 | 2104 | P-CLIP (3/8; Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Body | EACH | $1.27 | ||
| 14 | 2260 | SCREWS (6; 7/16; Phil Pan-Flat Head) - Use to fasten P-Clips; Sideplates; and Lanyard Pin | EACH | $1.27 | ||
| 15 | 1601 | PLUG (3-Pin; Female; 2-Wire) - For front of Power Supply | EACH | $14.63 | ||
| 16 | S7930 | EZ-SWIVEL (For 2-wire Cable) - Can be used on any 2-wire Cable Assembly | ASSEMBLY | $46.62 | ||
| 17 | A16250 | CABLE ASSY. (2-Wire; 51 Foot; Floating) - AquaJet | EACH | $240.12 | ||
| 25 | S8730 | JET VALVE ASSEMBLY (Does not include Extension Brackets) - AquaJet | EACH | $42.38 | ||
| 26 | 2002BL-PR | BODY ASSY. (Blue; with Lock Tabs; no Valve Housing) - AquaJet | EACH | $138.65 | ||
| 8351 | FLAT PLUG (White; Plastic) - Use to plug large holes on the Body Assembly | EACH | $1.27 | |||
| 2400 | NAIL PLUG (White; Plastic) - Use to plug small holes on the Body Assembly | EACH | $1.27 | |||
| 27 | 2251 | SCREW (8-18 x 3/4; Phil Small Head) - Use to fasten the sides of the Jet Valve Assembly together | EACH | $1.27 | ||
| 29 | S8731 | VALVE SPRING (St.Steel; Hinge-spring; Use inside of Jet Valve Assembly) - AquaJet | EACH | $4.66 | ||
| 32 | 8729 | EXTENSION BRACKET (5 Holes; For Jet Valve) - AquaJet | EACH | $23.30 | ||
| 33 | 8728 | VALVE FLAP (White; Plastic; Use inside of Jet Valve Assembly with Valve Lock) - AquaJet | EACH | $4.66 | ||
| 34 | 8727 | VALVE LOCK (White; Plastic; Use inside of Jet Valve Assembly with Valve Flap) - AquaJet | EACH | $4.66 | ||
| 35 | 8730 | JET VALVE HOUSING (Black; Plastic; only housing; no Extension Brackets) - AquaJet | EACH | $31.78 | ||
| 36 | SP9204BL | LOCK-TABS (Blue; Plastic; to hold Bottom Lids to base of cleaners) - AquaJet | SET OF 2 | $3.60 | ||
| 37 | 3394 | BRACKET (For Center Wheel on Jet and Rover units) - Use to hold movable small black wheel | EACH | $3.60 | ||
| 38 | 2303 | SCREWS (18-8; 8/32 x 1/2; Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly | EACH | $1.27 | ||
| 39 | 7133 | LOCK-NUT (Nylon Insert; Hex) - Use to fasten the Screws of the Lock-Tabs | EACH | $0.83 | ||
| 40 | 1626 | GROMMET (Rubber; Use around Cable Assembly on Body) - AquaJet | EACH | $2.44 | ||
| 41 | S3477 | FOAM BLOCK (w/ Slot & Bracket; 4 Square Float) - AquaJet | EACH | $3.60 | ||
| 3477 | BRACKET (For Foam Block with Slot) - AquaJet | EACH | $2.44 | |||
| 42 | 2660 | BUSHING (Black; Plastic; Use around Poly-Tube on Body) - AquaJet | EACH | $2.44 | ||
| 45 | S3396-Right | SIDEPLATE (Black; Right side with Jet Nozzle) - AquaJet | EACH | $46.62 | ||
| 45 | S3396-Left | SIDEPLATE (Black; Left side with Jet Nozzle) - AquaJet | EACH | $46.62 | ||
| 53 | 3393BK | SMALL WHEEL (Black; For under Sideplate) - AquaJet | EACH | $3.16 | ||
| 60 | A6005-03 | PUMP MOTOR (AquaJet) | EACH | $213.79 | ||
| 61 | 4402 | PROPELLER - AquaJet | EACH | $12.25 | ||
| 62 | 2302 | SCREWS (8; 3/4; Phil Pan Head; Use to fasten the Pump to the Jet Valve) - AquaJet | EACH | $1.27 | ||
| 63 | 6027 | IMPELLER (Red) - AquaJet | EACH | $12.25 | ||
| 64 | 6028 | IMPELLER HOUSING (Red) - AquaJet | EACH | $12.25 | ||
| 65 | 300096 | TUBING (Clear PVC; 5/16ID x 1/2OD) - Use to divert water from the Impeller to the to the Jet Bracket | PER FOOT | $1.10 | ||
| 85 | 4501 | SCREW (8-18 x 1/2; Phil Pan Head) - Use to fasten the Extension Brackets to the Jet Valve Assembly | EACH | $1.27 | ||
| 86 | SP5474 | SHRINKABLE BUTT CONNECTORS (Light Blue; crimp closed and heat shrink to seal) | PAIR | $2.54 | ||
| 87 | SP1617 | SHRINK TUBE (5/16; Blue) - For sealing 2-wire connections; use under Heat Shrink 1619 | 4 FEET | $46.64 | ||
| 87 | SP1619 | SHRINK TUBE (1/2; Black) - For sealing 2-wire connections; use over Heat Shrink 1617 | 4 FEET | $46.64 | ||
| SP1611 | SHRINK TUBE (3/4; Blue) - For sealing the Cable insulation below the P-Clip at the Handle Assembly | 4 FEET | $46.64 | |||
| 89 | 2670C | WHEEL COVER (Dome Disc; Snaps-in Hub) | EACH | $2.86 | ||
| 90 | S2670 | WHEEL ASSEMBLY (Black; Rubber; 6) - AquaJet | EACH | $9.33 | ||
| 91 | 11067 | STAR WASHER (For end of axle) - AquaJet | EACH | $3.60 | ||
| 92 | 3603 | WASHER (Nylon; Flat) - Use for AquaJet on the end of Wheel | EACH | $1.27 | ||
| 93 | S1019-12 | TUBE (Black; Plastic; 3 Oval; 12 Long) - AquaJet | EACH | $19.04 | ||
| 94 | S3420-1H | AXLE (Fiberglass; 16.5x1/2OD; 1 hole; Front / Rear) - AquaJet | EACH | $11.64 | ||
| 94 | S8736 | AXLE ASSEMBLY (White; Fiberglass; w/ Switching-Wedge) - AquaJet | EACH | $15.88 | ||
| 95 | 11002 | CLEVIS PIN (St.Steel; 1/4 x 2.232) - AquaJet | EACH | $2.86 | ||
| 95 | 700016 | CLEVIS PIN (St.Steel; 1/4 x 2.375) - AquaJet | EACH | $2.86 | ||
| 96 | 2679 | LANYARD (Black; Plastic; To tie onto Clevis Pin; attached to Tube or Body) - AquaJet | EACH | $1.27 | ||
| 101 | 8100 | FILTER BAG (Fine) - AquaJet | EACH | $48.97 | ||
| 101 | 8200 | FILTER BAG (Mesh) - AquaJet | EACH | $46.75 | ||
| 103 | 5311 | FILTER SCREEN (NEW; Blue; Bowl-shaped) All AquaJet; JetMax; and Pool Rover units | EACH | $11.64 | ||
| 105 | A9200XWB | BOTTOM LID ASSY. (White; W-shaped Wire Frame) - AquaJet | EACH | $92.11 | ||
| 106 | 9305BL | INTAKE VALVE FLAP (Blue Plastic) - AquaJet | EACH | $4.60 | ||
| 108 | S3103 | H-FLOAT (Foam; Plastic; with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not fast enough | ASSEMBLY | $11.64 | ||
| 109 | SP3104 | SIDE POCKET FLOATS (White; Foam Blocks) - Put in Bottom Lid if wall-climbing is not fast enough | PAIR | $3.71 | ||
| 110 | 7075C | POWER SUPPLY (3-Prong Male; 90s Dial-Timer; 2hr Auto) - AquaJet | EACH | $176.53 | ||
| 111 | 7108 | SOCKET ASSY. (3-Pin; Male; 2-Wire) - AquaJet | EACH | $10.49 | ||
| 7115 | SOCKET ASSY. (Canadian CSA; 3-Pin; Female; 2-Wire) - Aquabot / Jet and Rover cleaners; Aquamax / Jr | EACH | $10.49 | |||
| 112 | 7206 | FUSE HOLDER (MINI; Phillips Head style) - AquaJet | EACH | $8.14 | ||
| 7207 | FUSE (2.5 Amp; MINI; 250 Volt; Slow- Blow) - AquaJet | EACH | $3.07 | |||
| 114 | 7105 | LIGHTED SWITCH (Thin; 1¼ x ½; Red with Light; 3-Wire) - Use for Power Supply | EACH | $8.16 | ||
| 114 | 7208 | NON-LIGHTED SWITCH (Thin; 1¼ x ½; Red; 3-Wire) - Use for Power Supply with Dial or Digital Timer | EACH | $8.16 | ||
| 117 | 7041A | HANDLE (Plastic; with Hardware) - Use on All Power Supplies except Ultramax | ASSEMBLY | $6.23 | ||
| 118 | 7102 | CORD FOR POWER SUPPLY (3-Wire; Green; Black; and White) - For Power Supply for AquaJet | EACH | $11.66 | ||
| 119 | 7132A | TIMER 90 SECOND (Front Dial; 2hr Auto-Off; No Reset Switch) - For Power Supply for AquaJet | EACH | $52.47 | ||
| 119 | 7271 | TIMER 90 SECOND (OLD; Front Dial; 2hr Auto-Off; 5 Wire; Reset Switch) - only when specified by Aqua Products | EACH | $52.47 | ||
| 119 | 7271D | DIGITAL TIMER (NEW; Front Digital display; 1-7 hours Adjustable Auto-Off) - AquaJet | EACH | $52.47 | ||
| 800070 | NOVUS 2 Plastic Polish 24 oz. Bottle | EACH | $80.56 | |||
| 1609 | TIE (Blue; 4; Plastic; reusable) - Use for coiling the Cable Assembly among other things | EACH | $1.27 | |||
| Parts that are marked with this symbol should be installed by a Certified Service Center. | ||||||